The company on Thursday announced it intends to launch a city center-to-airport network in Los Angeles by 2026, building on its plans to fly in New York City and Chicago. The service is meant to replace one-to-two-hour drives by car with more direct aerial routes while remaining cost competitive with ground-based rideshare options such as Uber and Lyft.

Archer in July also struck a deal with Southwest Airlines to connect Southwest terminals across California, where it is in the process of building a network of hubs linking South San Francisco, Napa, San Jose, Oakland, and Livermore.

The manufacturer’s flagship Midnight air taxi is designed for a pilot to fly as many as four passengers on back-to-back, 20-to-50 sm, 10-to-20-minute trips, with only a few minutes of charge time in between. The company hopes to obtain type certification from the FAA in time for a 2025 commercial rollout in New York and Chicago.

After that, it will set its sights on Los Angeles, where it intends to connect key locations such as Los Angeles International Airport (KLAX), Orange County, Santa Monica, Hollywood Burbank, Long Beach, Van Nuys, and the University of Southern California with vertiports. These takeoff and landing hubs are akin to heliports but will include electric aircraft chargers for Midnight and other electric aircraft to juice up.

Archer also has a memorandum of understanding (MOU) with FBO network Signature Aviation to install electric chargers at more than 200 Signature terminals nationwide, adding to the number of potential takeoff and landing sites for Midnight.

Archer competitor Joby Aviation is also looking to fly in the Los Angeles area in partnership with Delta Air Lines and earlier this year began the process of installing eVTOL infrastructure in California. Boeing air taxi subsidiary Wisk Aero, eVTOL jet manufacturer Lilium, and eVTOL developer Overair are among firms with similar ambitions.

The companies hope to showcase their aircraft on the world stage when the 2028 Olympic and Paralympic Games in Los Angeles arrive— an ambitious target but one that is in line with the FAA’s own expectations for the industry. The city will also host men’s soccer games during the 2026 World Cup, which is being jointly held in the U.S., Canada, and Mexico.

“Establishing our LA network ahead of the global events that are coming to the region over the next three years is a milestone that will put Midnight on display for the whole world to see,” said Adam Goldstein, CEO of Archer. “LA is known for its horrendous traffic—our goal is to offer a safer, faster, and more sustainable alternative travel option.”

A handful of eVTOL manufacturers, including Germany’s Volocopter and China’s AutoFlight, are supposed to demonstrate their air taxis at the 2024 Olympic and Paralympic Games in Paris, but those flights have yet to take place and may not happen at all.

Aiding Archer, however, is a tight relationship with the FAA and the backing of California state officials such as Governor Gavin Newsom.

“Homegrown companies like Archer Aviation are pioneering the next generation of zero-emission transportation that will help California cut pollution, clean our air, and reduce traffic,” said Newsom.

Like this story? We think you’ll also like the Future of FLYING newsletter sent every Thursday afternoon. Sign up now.

The post Archer Bringing Electric Air Taxis to Los Angeles by 2026 appeared first on FLYING Magazine.

On Friday, Southwest and Archer Aviation, manufacturer of the Midnight electric vertical takeoff and landing (eVTOL) air taxi, signed a memorandum of understanding (MOU) to develop a network of routes connecting Southwest terminals at California airports.

The airline is the state’s largest air carrier and owns key hubs in Los Angeles, San Diego, Sacramento, and the San Francisco Bay Area, where Archer recently announced plans to construct eVOL infrastructure, such as takeoff and landing vertiports, at five airports.

Archer’s flagship aircraft, which takes off and lands like a helicopter but flies on fixed wings like an airplane, is designed for a pilot to fly as many as four passengers on 20 to 50 sm (17 to 43 nm) air taxi routes, cruising at up to 150 mph (130 knots).

As soon as next year, it will begin ferrying customers to and from airports at a price the manufacturer claims will be cost-competitive with ground-based rideshare services such as Uber or Lyft.

“Integrating Archer’s electric aircraft into the travel journey potentially gives us an innovative opportunity to enhance the experience of flying Southwest,” said Paul Cullen, vice president of real estate for the airline.

Cullen also left the door open for an expansion of Southwest’s air taxi service to locations in other states.

Added Dee Dee Meyers, senior adviser to California Governor Gavin Newson and director of the Governor’s Office of Business and Economic Development: “This initiative is designed to help revolutionize clean transportation with zero-direct emission and affordable options, enhancing the passenger experience, and supporting California’s climate action goals.”

The agreement with Southwest builds on Archer’s existing relationship with United Airlines, which in 2021 agreed to purchase 100 Midnight air taxis for an estimated $1 billion. Under that agreement, Archer will develop a software platform, mobile booking platform, and vertiport integration technology for a commercial service operated by United.

Delta Air Lines, the third major U.S. carrier with plans to launch an air taxi network, is working with Archer competitor Joby Aviation.

In addition, Archer in June signed a deal with Signature Aviation that would give it access to more than 200 FBOs, including those at New York Liberty International Airport (KEWR), Chicago O’Hare International Airport (KORD), and other airports the company intends to serve. The manufacturer also has an agreement with FBO network operator Atlantic Aviation to electrify Atlantic terminals in New York, Los Angeles, Miami, and San Francisco.

“With Archer’s Midnight aircraft, passengers will be able to fly above traffic to get to the airport faster,” said Nikhil Goel, chief commercial officer of Archer. “Southwest customers could someday complete door-to-door trips like Santa Monica [California] to Napa in less than three hours.”

Archer and Southwest will begin by developing a concept of operations for Midnight out of Southwest terminals, partnering with airline employees and union groups such as the Southwest Airlines Pilot Association (SWAPA).

The companies “plan to collaborate over the next few years as eVTOLs take flight,” which does not commit them to a 2025 or 2026 launch. Archer, Joby, and other eVTOL manufacturers such as Beta Technologies and Overair intend to enter commercial service during that time frame.

Adding Southwest as a partner could be key for Archer when considering the activities of its competitor overseas.

Both firms plan to fly in the United Arab Emirates, including the cities of Abu Dhabi and Dubai. In February, however, Joby signed what it describes as an exclusive six-year deal with Dubai’s Road and Transport Authority, giving it the sole right to operate an air taxi service in the emirate. Archer CEO Adam Goldstein has disputed the exclusivity of the agreement, saying it will have no impact on the company’s plans.

That dynamic has not yet played out in the U.S.—both companies plan to fly in New York, for example. But if Joby intends to replicate the strategy of gaining an edge over competitors with exclusive deals, partnerships such as that with Southwest become more important.

Notably, the companies have also butt heads on eVTOL infrastructure. Each is pushing for a different electric aircraft charging system to become the industry standard, similar to how Elon Musk fought for Tesla’s North American Charging Standard to supplant the widely accepted Combined Charging Standard (CCS) for electric ground vehicles (a fight Tesla ultimately would win).

Similarly, Joby wants its Global Electric Aviation Charging System (GEACS) to replace a modified version of the CSS supported by Archer, Beta, and others, which could throw a wrench into their FBO electrification plans.

Among eVTOL manufacturers, Archer and Joby are the closest to being able to fly in the U.S. Each has achieved a full transition flight using a prototype air taxi and expects to begin the critical for-credit phase of FAA certification in the coming months.

In addition, both are qualified to perform eVTOL maintenance and repairs and are in the process of training an initial group of pilots to fly their respective aircraft.

The goal is for those activities to be complete in time for a 2025 launch. Whether Southwest will be a part of that occasion remains to be seen.

Like this story? We think you’ll also like the Future of FLYING newsletter sent every Thursday afternoon. Sign up now.

The post Southwest Strikes Deal With Archer for Electric Air Taxi Service appeared first on FLYING Magazine.

Archer’s flagship design, Midnight, is built for a pilot to fly as many as four passengers on 20 to 50 sm (17 to 43 nm) routes, cruising at 130 knots and charging for just a few minutes between trips. The manufacturer’s goal is to compete against ground-based ridehailing services such as Uber or Lyft with a comparably priced offering.

In the Bay Area, the company will work with real estate giant Kilroy Realty Corp. The partners signed a memorandum of understanding (MOU) to make the 50-acre Kilroy Oyster Point waterfront campus in South San Francisco the anchor of Archer’s planned network.

Archer and Kilroy will look to build a vertiport at Oyster Point, connecting it with routes to Napa, San Jose, Oakland, and Livermore.

“We’re thrilled to collaborate with Kilroy on developing infrastructure to support Archer’s air mobility service and laying the foundation for a robust network of landing sites throughout the Bay Area,” said Bryan Bernhard, chief growth and infrastructure officer for Archer.

The manufacturer says it already has relationships with infrastructure and operations providers in those cities. One of its two main FBO partners, Atlantic Aviation, has hubs in Napa and San Jose. The other, Signature Aviation—which earlier this week agreed to install Archer electric aircraft chargers at 200 of its locations—also has a site in San Jose and another in Oakland.

Interestingly, Livermore Municipal Airport (KLVK), that city’s sole airfield, has no scheduled airline service and is designated as a regional reliever airport. Five Rivers Aviation, which operates a full-service FBO at the airport, appears to be Archer’s partner there.

San Francisco International Airport (KSFO), meanwhile, is a hub for Archer partner and investor United Airlines. The companies plan to launch routes in Chicago and New York City, also hub airports, by 2025.

In addition to constructing a vertiport at Oyster Point, Archer and Kilroy intend to create what Archer dubs “Sea Portal”—a renewable energy-powered development that offers both eVTOL and electric ferry services for all companies at the waterfront hub. According to the manufacturer, the facility could come online by the end of next year. Looking ahead, the partners will explore expansions to other Kilroy sites.

“We believe that this innovative and sustainable service has the potential to provide exceptional convenience and optionality to current and future tenants at the project, further differentiating Kilroy Oyster Point within the South San Francisco market,” said Angela Aman, CEO of Kilroy.

Archer began building the first Midnight production prototypes, which it will use to complete type certification evaluations with the FAA, in February. The aircraft received its final airworthiness criteria from the FAA in May and completed its first transition from hover to forward flight the following month during a remotely piloted test.

In June, Archer became one of just two eVTOL manufacturers to earn FAA Part 135 air carrier permissions, the other being competitor Joby Aviation.

It expects to install electric charging stations at Atlantic FBO locations in New York, Los Angeles, San Francisco, and Miami by next year, followed by similar infrastructure at as many as 200 Signature FBOs. Newark Liberty International Airport (KEWR) in New Jersey, Chicago O’Hare (KORD) International Airport, and KSFO—the bases of operations for Archer’s New York, Chicago, and Bay Area services—are all part of Signature’s network.

The company also intends to add electric chargers to planned air taxi hubs in Dubai and Abu Dhabi in the United Arab Emirates, which is shaping up to be its initial overseas launch market.

Like this story? We think you’ll also like the Future of FLYING newsletter sent every Thursday afternoon. Sign up now.

The post Archer, Kilroy Building Electric Air Taxi Network in Bay Area appeared first on FLYING Magazine.

Archer on Wednesday announced its subsidiary, Archer Air, received an FAA Part 135 air carrier and operator certificate, authorizing it to operate as a commercial airline as Midnight advances toward type certification. The manufacturer anticipates it will achieve that milestone next year. In the meantime, it plans on using its Part 135 approval to fly conventional aircraft “to refine its systems and procedures in advance of launching Midnight into service for airlines like United Airlines,” which in 2021 agreed to purchase $1 billion worth of Archer aircraft.

“Over my career, I’ve helped lead the buildout of JetBlue and Breeze Airways, and now that Archer has its Part 135 and 145 certificates from the FAA, I’m thrilled for our incredible team to commence operations on this innovative new air taxi service soon,” said Tom Anderson, chief operating officer of Archer Air.

The Part 135 certification process comprised five stages, Archer said. The manufacturer was required to submit operational manuals and procedures to the FAA, and company pilots demonstrated compliance with those materials under agency observation.

“This milestone reflects our team’s unwavering dedication to safety and operational excellence as we stand up one of the world’s first electric air taxi services for communities across the U.S. with a safe, sustainable and low noise transportation solution,” said Adam Goldstein, founder and CEO of Archer.

Archer’s flagship Midnight is a zero-emission model designed for a pilot to fly as many as four passengers on 20 to 50 sm (17 to 43 nm) air taxi routes, cruising at up to 150 mph (130 knots). The air taxi is intended to be cost competitive with ground-based rideshare services such as Uber or Lyft, replacing lengthy commutes with 10-to-20-minute flights, while producing significantly less noise than a helicopter.

Archer is one of just two eVTOL air taxi manufacturers to receive Part 135 permissions from the FAA, the other being competitor Joby Aviation. Joby, which unlike Archer intends to operate its own aircraft in the U.S., obtained its authorization in 2022.

Archer will have a hand to play in United’s operation of Midnight, though.

The company is developing a proprietary operations software platform, mobile booking platform, and technology that will integrate with vertiports, all of which will be essential to a commercial service. Now, it can begin to refine those platforms using conventional aircraft.

With Wednesday’s announcement, Archer now holds Part 135 and Part 145 certification, the latter of which authorizes it to perform select maintenance, repair, and overhaul (MRO) services. But Midnight won’t be able to fly commercially until it achieves type certification, which would validate the aircraft’s design, and production certification, which will allow Archer to begin producing the type-certified model.

The manufacturer has already begun building three type-conforming Midnight air taxis to be used in crewed flight testing later this year. For-credit evaluations with the FAA will follow and represent one of the most critical steps in the type certification process.

The agency in May awarded Archer final airworthiness criteria for Midnight, which laid out the standards it will use to gauge the aircraft’s ability to integrate safely into the national airspace. Competitor Joby is the only other eVTOL manufacturer to reach that step with the regulator, obtaining its own criteria one month prior.

Like this story? We think you’ll also like the Future of FLYING newsletter sent every Thursday afternoon. Sign up now.

The post Archer Obtains FAA Part 135 Air Carrier Certification appeared first on FLYING Magazine.

The United Airlines partner and Kakao Mobility Corp.—a subsidiary of South Korean conglomerate Kakao which runs Kakao T, a popular taxi-hailing service akin to Uber in the U.S.—signed an agreement that covers the latter’s planned purchase and operation of up to 50 aircraft as early as 2026, beginning in Seoul.

The manufacturer estimates the value of the potential sale, including predelivery payments it expects to receive next year, at about $250 million. Kakao Mobility last year signed a similar agreement with U.K. eVTOL manufacturer Vertical Aerospace.

The taxi-hailing company has also tapped Archer as its eVTOL partner for Korea’s K-UAM Grand Challenge: a multicity, public-private effort to demonstrate eVTOL operations, with an eye toward commercializing those services by 2025. Kakao Mobility will pay Archer a first installment of $7 million this year, followed by a second installment in January, to support the effort. The partners expect to complete a public demonstration later this year.

“We are committed to revolutionizing transportation with Archer’s eVTOL aircraft, ushering in a future of cleaner, faster, and more efficient travel between and within Korean cities,” said Nikhil Goel, chief commercial officer for Archer.

According to Korea’s transport ministry, commuters in the Seoul Capital Area—which, with a population of a quarter of a million people, is one of the largest metropolitan areas in the world and home to half the country’s population—typically spend about 90 minutes per day stuck in traffic.

Archer promises to replace those commutes with estimated 10- to 20-minute air taxi flights, charging for just a few minutes in between. The manufacturer’s five-seat eVTOL is designed for four passengers and a pilot, with a range of about 52 sm (45 nm) and cruise speed of 130 knots.

It claims the aircraft will be cost-competitive with ground-based rideshare services such as Uber, Lyft, and Kakao T, which according to Kakao Mobility has more than 30 million registered users, many of them Seoul.

“The vision is clear—reduce the hours lost in traffic and elevate everyday travel with an electric air taxi service that features Archer’s Midnight aircraft,” said Christopher SungWook Chang, senior vice president of Kakao Mobility.

However, the partners—and the South Korean government—have ambitions to introduce air taxi flights nationwide.

The country’s Ministry of Land, Infrastructure, and Transport in 2021 unveiled the K-UAM Operation Concept 1.0: a blueprint, similar to the FAA’s Innovate28, to commercialize urban air mobility (UAM) services by 2025. Initial flights would be piloted and take place on predefined routes in cities such as Seoul and Incheon, with nationwide introduction of fully autonomous air taxi flights by 2035.

Before then, the government is conducting the K-UAM Grand Challenge to validate the technology.

Kakao Mobility and a consortium that includes electric vehicle charging service LG Uplus, vertiport developer GS Engineering & Construction (GS E&C), and now Archer will be one of three consortiums to participate in public demonstrations under the effort, which seeks to garner public support for UAM services.

One group, which includes flag carrier Korean Air, Hyundai Motor Co., and Korea Telecom, completed the initiative’s first UAM operations demonstration in April. Archer and Kakao Mobility have set a target for their first public demonstration later this year.

Archer through the consortium will also work with regulators to create standards around eVTOL certification and operation. With the help of LG Uplus and GS E&C, the partners plan to construct vertiports, air traffic management systems, and other infrastructure to build a UAM ecosystem in Korea.

Archer competitor Joby Aviation is also part of the K-UAM Grand Challenge and expects to begin demonstration flights this year. The manufacturer in September partnered with SK Telecom—which is supporting it with $100 million in funding—to join a consortium that includes Korea Airports Corporation and Hanwha Systems.

Germany’s Volocopter was the first manufacturer to complete a crewed public eVTOL demonstration in the country in 2021, while California-based Overair last year signed several agreements with Korean partners, including a potential direct sale. Embraer eVTOL subsidiary Eve Air Mobility is also in the mix, having signed an agreement with UAM service provider Moviation for the purchase of its urban air traffic management system.

Beyond South Korea, Archer is looking to introduce Midnight in India, the United Arab Emirates, and U.S. cities such as New York and Chicago.

Like this story? We think you’ll also like the Future of FLYING newsletter sent every Thursday afternoon. Sign up now.

The post Archer Eyes Public Air Taxi Demos, Potential Sale in South Korea appeared first on FLYING Magazine.

The FAA on Thursday issued final airworthiness criteria for the company’s Midnight Model M001, making the aircraft only the second eVTOL air taxi to achieve that regulatory milestone in the U.S. The approval lays out the standards the regulator will use to gauge the aircraft’s ability to integrate into U.S. airspace. Archer aims to launch Midnight air taxi routes in New York and Chicago in partnership with United Airlines as soon as next year.

The manufacturer’s unique, zero-emission aircraft is designed for a pilot to fly as many as four passengers on back-to-back, 10-to-20-minute flights. The air taxi takes off vertically like a helicopter but cruises at up to 150 mph (130 knots) using a combination of fixed wings and forward propellers. Its optimal range is 10 to 50 sm (8.7 to 43 nm), but it can fly as far as 100 sm (87 nm) on a single charge.

Midnight has a total of 12 propellers, six of which are “tilt props” that can be positioned vertically or horizontally to aid in takeoff, landing, or forward flight. Propulsion is generated by six proprietary lithium-ion battery packs, each powering a pair of electric engines. The result, Archer claims on its webpage, is flights that are “up to 100 times quieter than a helicopter.”

The air taxi uses fly-by-wire flight controls and will be certified in the powered-lift category, a relatively new classification that still requires final FAA regulations on pilot certification. Archer claims it will ultimately be cost competitive with ground-based rideshare services, such as Uber and Lyft, on trips to and from urban centers and airports.

The FAA in December 2022 issued Archer’s proposed airworthiness criteria, allowing stakeholders and members of the public to comment on the prospective certification requirements. Competitor Joby Aviation received its own proposed requirements one month prior and is the only other eVTOL manufacturer to obtain final airworthiness criteria from the regulator, issued in March.

Archer’s finalized criteria are scheduled to be published in the Federal Register on Friday, where they will be visible to the public.

“Midnight is one giant step closer to taking passengers into the sky in the coming years in the U.S.,” said Billy Nolen, chief regulatory affairs officer at Archer and a former FAA administrator. “Thank you to the team at the FAA for their continued hard work in support of making the electrification of aviation a reality.”

The issuance of final airworthiness criteria allows Archer to proceed to for-credit flight testing with the regulator, a key step in the type certification process. For-credit testing will allow the FAA to gauge Midnight’s performance against the standards released Thursday, which could result in the aircraft being deemed safe to fly in U.S. skies.

Archer in February began building three type-conforming aircraft prototypes to be used in those evaluations. The manufacturer said Thursday that the first of those models will begin piloted flight testing later this year, followed by for-credit FAA testing.

“[Thursday’s] milestone adds significant momentum to Midnight’s certification program as we further ramp up our for-credit testing efforts with the FAA,” said Eric Wright, head of certification for Archer.

So far, only China’s EHang has managed to obtain type certification for an eVTOL air taxi from an aviation regulator, the country’s Civil Aviation Administration (CAAC). The manufacturer in December made the world’s first passenger-carrying eVTOL flight, completing a pair of commercial demonstrations in China.

German manufacturers Lilium and Volocopter also aim to launch commercial air taxi services in the next few years.

But Archer and Joby’s models are expected to be the first to take flight in the U.S., starting with major metro areas such as New York, Chicago, and Los Angeles. The companies have partnerships with major U.S. airlines, Archer with United and Joby with Delta Air Lines, though Joby intends to operate its own air taxi.

The manufacturers now have about a year and a half to meet their stated launch target of 2025. But the publication of final airworthiness criteria certainly gives them a lift.

Like this story? We think you’ll also like the Future of FLYING newsletter sent every Thursday afternoon. Sign up now.

The post FAA Issues Final Airworthiness Criteria for Archer Midnight Air Taxi appeared first on FLYING Magazine.

FLYING took the opportunity to see what’s on the horizon in terms of both traditional helicopters and the red-hot powered-lift and eVTOL categories ahead of the Helicopter Association International’s HeliExpo in February at Anaheim, California.

Bell 525

The Bell 525 (at right) proposes to bring the first fully digital, fly-by-wire rotorcraft to the civil market, and Bell Helicopter has been hard at work getting the program to the finish line down at its headquarters in Fort Worth, Texas.

So what does that mean? The FBW design logic on the 525 is different from an aftermarket add-on autoflight system such as the GFC 600H. In this case, Bell’s partnership with Garmin has translated to the G5000H flight deck.

Tim Evans, business development manager on the 525 program, gave FLYING a special update ahead of Heli-Expo.

“Broadly speaking, flight testing is continuing very nicely, with the good relationship we have with the FAA,” said Evans. “Last year, we were able to complete nine TIAs towards certification, and by the end of February, we should have only five events left. Two of them we’re already into, and the other two [should be complete] by midyear.”

• READ MORE: Bell 360 Invictus Prototype Advances with T901 Engine Delivery

At that point, all of the delegated activities that Bell is responsible for will be finished—and the team will turn things over to the FAA. From there, functional and reliability testing is the last milestone to cross, with 150 hours of flying with the FAA, putting the 525 through its operational paces.

As with similar Textron Aviation aircraft programs, Bell engaged its Customer Advisory Board, which gave a clear message.

“The overwhelming response?” said Evans. “It’s automation that will bring a level of safety seen commensurately on the fixed wing side—the redundancy will be game-changing to how the civil market functions.”

According to Bell, the 525 will deliver what the customer feedback told it was needed: “When you pull it into a hover and get to 20 to 30 feet—with no pedals—it will hold that attitude, essentially hands off.”

Pilots can also turn into an angle of bank, with no pedal inputs, and the 525 will do a full 360 at the input bank angle.

“The control laws are able to anticipate and calculate the pilots’ inputs,” said Evans, noting that the 525 also benefits from a level of redundancy not seen before in this class of rotorcraft. “We’re shaping some of the requirements in Part 29, so the FAA required a triple redundancy—three computers, three hydraulic [systems]—so [it’s] a safer aircraft at a foundational level.”

Several markets that Bell shaped the 525 for include offshore, VIP/head of state, and SAR/parapublic/Coast Guard—so Bell built certain provisioning into the airframe itself, though kitting will take care of the details. Bell has multiple launch customers and is in active negotiations, though it can’t say yet who those first deliveries will go to.

In closing our briefing, Evans also wanted to highlight the green side of the design.

“If you compare the 525 to others in the medium space, it’s going to be 30 percent more efficient than a [Sikorsky] S-92. That’s one we’re pretty proud of. We’ve also flown it on SAF fuel, a 30 percent blend, but capable of up to 100 percent.”

Leonardo AW09 and AW609

Two projects from Leonardo Helicopters have also been winding their way through the certification process along the European Union Aviation Safety Agency (EASA) track—the modern-yet-standard AW09 helicopter and the AW609 tiltrotor design.

The single-engine AW09 was originally developed by Kopter Group, a company acquired by Leonardo in 2020. Proposed as a multimission solution for VIP transport, emergency medical services, utility operations, and security teams, the AW09 will carry up to eight passengers.

A five-blade, all-composite rotor system will translate into smooth flight characteristics and a high degree of maneuverability. Up front, the Garmin G3000H flight deck offers pilots next-generation glass. The Safran Arriel 2K powerplant has dual channel FADEC with an auxiliary backup system. Projected retail pricing begins at $3.9 million.

• READ MORE: Leonardo Tests AI-Enabled Visual Awareness System for Rotorcraft

A year ago, on March 16 and 17, Leonardo began familiarization flight testing with EASA on the tiltrotor AW609, following on to FAA testing in February. The company plans dual certification, so it is moving through the process with both agencies concurrently. Leonardo pursues this strategy in hopes of making up for some lost time, as the AW609 began life in the 1990s as a joint project between Bell and Agusta, called the BA609.

That’s probably why it bears some resemblance to the more commonly known Bell V-22 Osprey. The AW609 similarly enters the powered-lift category with its ability to take off vertically and fly at high cruise speeds with props tilted forward—up to twice the speed of normal helicopters, according to the company. The expected service ceiling will be 25,000 feet msl.

Its projected certification timeline remains in the distance, with a proposed retail price beginning at roughly $24 million.

Up Next for Robinson?

Robinson continues to set the pace on the light GA end of the market with its line of piston-powered R22s and R44s, and turbine R66 helicopters.

• READ MORE: Airworthiness Directive Issued for Robinson Helicopters

While the Lycoming O-320-powered R22 is well known in training, the R44—with its O-360 engine—crosses over into the recreational and light transportation markets with the Raven and Raven II variants. The R66 fulfills a variety of roles, with added cruise speed—up to 110 knots—extra passenger capacity, and turbine reliability from its Rolls-Royce RR300 engine.

As of press time, the company indicated news on the horizon that it would be sharing at Heli-Expo—including the updated empennage for the R44—so stay tuned into FLYING’s reporting from the event.

eVTOLs Next?

As we gear up for Heli-Expo, we know that the show floor will host an entire flight line of eVOTLs in various stages toward initial FAA certification. While we covered Joby Aviation’s prospects in detail in our “First Look: Joby’s eVTOL Future” piece in this issue, it is far from the only player in town.

Archer Aviation’s Midnight has recently passed its Phase 1 flight testing program, hot on Joby’s heels. The company announced in late January that it would be ready for the beginning of for-credit flight testing with the FAA later in 2024. The Midnight cuts a similar profile to the Joby aircraft—carrying one pilot plus four passengers—but with six fixed rotors in a forward flight position and six fixed for vertical flight. The test unit has yet to make the transition from vertical to forward flight as of press time, but we expect this to come soon.

Beta Technologies launched its program with a conventional takeoff and landing (CTOL) aircraft

called the Alia to test its electric propulsion system in a more traditional airframe before moving forward into the powered-lift space. As of late January, Beta had conducted multiple flights with the U.S. Air Force and U.S. Department of Defense in both on-base and cross-country ops as part of the Agility Prime program. While it tests the applicability and cost reduction

possible—using electric aircraft in missions including casualty evacuation to go operational in 2025—Beta hopes to take what it learns and produce an eVTOL version by 2026.

Overair’s Butterfly eVTOL is also coming up quickly, as the Southern California-based company signs on several new customers in South Korea as well as Houston-based Bristow Group. Overair is now working through its G-1 Stage III means of compliance documentation with the FAA, with testing of the full-scale, six-seat prototype to begin later this year.

Meanwhile, south of the equator, Eve Air Mobility recently saw Brazilian aviation authority ANAC release the proposed airworthiness criteria for its design, along with bringing a list of key suppliers on board. Eve broke ground on its manufacturing facility in Taubaté, Brazil, earlier this year as well.

Many other players, including Volocopter, Lilium, and Jump Aero continue to chug along—and the race is really heating up as to who will make it to certification first. Oh, wait—that honor already belongs to EHang, which obtained CAAC’s blessing for its EH216-S in China in late 2023—and made the first commercial demonstration flights with it by December.

This feature first appeared in the March 2024/Issue 946 of FLYING’s print edition.

The post Rotor Roundup: What’s on the Horizon for Helicopters and eVTOLs? appeared first on FLYING Magazine.

The manufacturer on Wednesday announced it completed the installation of an “automotive style” battery pack manufacturing line within its integrated test lab and manufacturing facilities in San Jose, California.

The production line is intended to complement the company’s air taxi manufacturing facility in Covington, Georgia, where it expects to initially produce up to 650 aircraft per year. The site remains under construction but is “on track” to be completed later this year, Archer reaffirmed Wednesday.

“This is a major milestone for Archer as designing, developing, and mass producing electric propulsion systems that are purpose built for electric aircraft is the key to unlocking the electrification of aviation,” said Tom Muniz, chief technology officer of Archer. “The facility will give us the capability to scale our battery pack production to meet the demands of the output that our Covington, Georgia, facility will be capable of.”

Each of Archer’s Midnight aircraft will run on six of the company’s proprietary lithium-ion battery packs, which power a dozen electric engines. The cylindrical cells within each pack deliver a higher level of safety, performance, and scalability than other form factors, Archer says. The packs are also equipped with a proprietary thermal runaway containment capability.

Archer’s new battery pack manufacturing line is designed to operate at full capacity from day one and, according to the company, is capable of producing up to 15,000 battery packs per year.

Certain portions of the manufacturing process—including cell testing and loading, adhesive dispensing, laser cleaning, laser welding, and end-of-line testing—have been automated. The manufacturer says this is intended to improve product quality and operator safety while making it easier to trace data across the manufacturing cycle.

Unlike the manufacturing strategy for the Midnight air taxi, which leverages outside suppliers to provide the majority of the aircraft’s components, Archer chose to vertically integrate battery cell design and production, building and assembling those components in house.

The battery packs in March successfully endured a series of 50-foot drop tests, a feat they will need to accomplish again during for-credit testing with the FAA. Similar to the 50-foot fuel tank drop test for rotorcraft and fixed-wing aircraft, the evaluation is meant to gauge the batteries’ ability to withstand a significant impact, which could cause a leak, fire, or explosion if the tech is not up to standard. Archer considers it to be one of the most challenging tests in the type-certification process for Midnight.

The manufacturer is also evaluating its battery pack technology with NASA via a Space Act agreement with the agency. Initial testing will gauge battery cell safety, energy, and power performance, studying how they might function in “extreme abuse cases.” The battery pack testing arrangement is just one portion of the agreement, Archer says.

Like this story? We think you’ll also like the Future of FLYING newsletter sent every Thursday afternoon. Sign up now.

The post Archer Installs ‘Automotive Style’ Air Taxi Battery Pack Production Line appeared first on FLYING Magazine.

The German manufacturer of the world’s first electric vertical takeoff and landing (eVTOL) jet on Monday announced a firm order for 20 aircraft from UrbanLink, a U.S. eVTOL operator formed in March by aviation entrepreneur Ed Wegel, the founder and CEO of charter airline GlobalX.

Notably, the agreement—which includes another 20 purchase options—sets scheduled predelivery payments between the partners. UrbanLink intends to operate the manufacturer’s flagship Lilium Jet out of planned vertiports in South Florida, with the goal of forming a regional air taxi network by 2026.

The initial network will span Miami, West Palm Beach, Boca Raton, Fort Lauderdale, and Marco Island, Lilium says.

The collaboration represents a major boost to Lilium’s efforts to serve the Florida market, which has long been in its crosshairs. UrbanLink claims to be the first airline in the U.S. fully committed to integrating eVTOL aircraft into its fleet, giving the manufacturer a crucial operational partner it previously lacked.

“While many airlines have discussed the potential of operating eVTOL aircraft, none have made a definitive commitment,” said Wegel. “UrbanLink will be the first airline in the U.S. to integrate eVTOL aircraft into its fleet…After thorough evaluation of various manufacturers, we found the Lilium Jet to be the optimal choice for our needs, thanks to its superior cabin design, range, capacity, and cost-effectiveness.”

Fellow eVTOL air taxi manufacturer Archer Aviation has a similar relationship with United Airlines, which in 2022 paid $10 million out of its $1 billion deal for the purchase of up to 100 aircraft. Joby Aviation, which intends to operate its eVTOL itself, received a $60 million equity investment from partner Delta Air Lines, also in 2022.

“This is a huge milestone, not only for Lilium, but for the commercialization of eVTOLs in the U.S.,” said Sebastien Borel, chief commercial officer of Lilium. “We believe that this purchase of eVTOL aircraft is the first by a commercial operator that isn’t invested in the manufacturer that it is purchasing from. This is a sign that the market for eVTOL aircraft has matured, and there is growing demand for aircraft that can provide connections between, rather than just within, cities.”

Wegel—who led FAA certification for two U.S. Part 135 airlines and several U.S. Part 121 carriers, including Eastern Air Lines’ fleet of Boeing 737-800s in just eight months—founded UrbanLink as a standalone venture in March.

The industry veteran envisions Miami, Los Angeles, and San Juan, Puerto Rico, as the company’s early markets. It will then expand internationally beginning with the United Arab Emirates, which is rapidly becoming an eVTOL hot spot.

UrbanLink will provide the aircraft, pilots, and other systems needed to run the airline.

The firm picked the Lilium Jet for its fleet due in part to its quiet operation. The aircraft employs a unique fan-in-wing configuration, with 36 electric ducted fans embedded in its fixed wings. Compared to other eVTOL concepts, the design sacrifices efficiency in hover for a significant reduction in noise and improvement in cruise efficiency, where it will spend up to 95 percent of its time.

Since 2020, Lilium has worked with the city of Orlando and other stakeholders to build a regional air mobility (RAM) ecosystem for its eVTOL jet in Florida. Unlike Archer and Joby, which are focused on shorter urban air mobility (UAM) routes, Lilium expects its aircraft to fly between cities, cruising at 162 knots on trips spanning 25 to 125 sm (22 to 109 nm). That range is another factor that garnered UrbanLink’s interest.

Fractional aircraft ownership company NetJets in 2022 became a Lilium partner, signing a memorandum of understanding to purchase 150 aircraft which it will operate within the Florida network. Vertiports, under development at locations such as Orlando International Airport (KMCO), will function as hubs for the service.

Vertical flight services provider Bristow Group will provide maintenance services across the network, while FlightSafety International has agreed to train an initial group of Florida eVTOL pilots.

However, adding an airline partner makes the company’s plans seem much more feasible.

In addition, the German manufacturer has a partnership with Atlantic Aviation to electrify more than 100 FBO terminals nationwide. The sites—30 of which are within Lilium target markets such as Florida, Texas, and Southern California—will be transformed to accommodate its seven-seat eVTOL jet.

Lilium expects the first piloted Lilium Jet flight test to occur in late 2024, with European Union Aviation Safety Agency (EASA) type certification in 2025. FAA certification, via the Bilateral Aviation Safety Agreement between the two regulators, would follow shortly after. Lilium remains the only eVTOL manufacturer with certification bases on both sides of the Atlantic.

UrbanLink expects to begin the FAA certification process in late 2025, with commercial service launching by summer 2026.

Like this story? We think you’ll also like the Future of FLYING newsletter sent every Thursday afternoon. Sign up now.

The post Lilium Receives Order for 20 eVTOL Jets, Forms Operational Partnership in U.S. appeared first on FLYING Magazine.

At the inaugural DriftX conference in Abu Dhabi on Thursday, Archer Aviation and Joby Aviation, both headquartered in California, signed agreements with Abu Dhabi government agencies to introduce their respective air taxis in the Emirate.

Archer signed a framework agreement with the Abu Dhabi Investment Office (ADIO), which the company says includes hundreds of millions of dollars in investments, to commercialize its flagship Midnight air taxi in the UAE, with a commercial launch as early as next year.

Joby also is eyeing a 2025 launch in the UAE. On Thursday, the company signed a multilateral memorandum of understanding (MOU), with the Emirate of Abu Dhabi’s Department of Municipalities and Transport (DMT), Department of Economic Development (ADDED), and Department of Culture and Tourism. The collaboration would establish Joby air taxi services in the Emirate and elsewhere within the country.

The companies signed their respective agreements at DriftX, a new, two-day mobility conference in Abu Dhabi backed by ADIO and the city’s Sustainable and Autonomous Vehicle Industry (SAVI) cluster. SAVI, of which both Archer and Joby are members, is an initiative that seeks to transform the Emirate’s transportation by air, land, and sea.

Archer’s collaboration further will focus on in-country aircraft manufacturing operations and eVTOL pilot training, which has different requirements than those for most other aircraft. The ADIO, in collaboration with Archer and other partners, will also build vertiports in “critical locations” throughout Abu Dhabi.

“This substantial agreement with Abu Dhabi is a pivotal moment for Archer’s commercialization efforts across the Emirates, as it provides the catalyst to accelerate the launch of our electric air taxi service in the UAE as soon as late 2025,” said Adam Goldstein, founder and CEO of Archer.

ADIO will further help Archer establish an international headquarters and engineering “Center of Excellence” in Abu Dhabi, which were proposed under a previous agreement. Plans for a production facility in the city, which would be aided by automobile manufacturing partner Stellantis, are also in the works.

These facilities and others are expected to attract local Emirati talent through an ADIO-established workforce development plan.

“We are excited to support Archer toward establishing its international headquarters in Abu Dhabi and to develop a comprehensive investment framework that will accelerate its progress towards manufacturing and operating its Midnight aircraft in the UAE,” said Badr Al-Olama, director general of the ADIO.

Archer also has the backing of Mubadala Capital, a UAE state-owned sovereign wealth fund, and operational partnerships with local firms Falcon Aviation and Air Chateau. The latter in November signed an MOU to purchase 100 Midnight air taxis.

Joby, meanwhile, is setting its sights on Abu Dhabi for the first time following a prior agreement with the Emirate of Dubai’s Road and Transport Authority (RTA). The company says the arrangement gives it exclusive rights to operate air taxis in the Emirate for six years, beginning with its planned launch in 2025.

The deal caused a stir within the eVTOL industry. But Archer has offered some pushback.

“I do not believe it will impact our operations in Dubai or our ambitions in Dubai,” Goldstein told FLYING in March. “We believe we will be able to operate there, and we will have a strong hub out of Abu Dhabi. We’re glad to see Joby coming to the region and leaning in, because we think it’s a good early market for eVTOL players to start.”

Joby teased the possibility of inter-Emirate routes, such as between Dubai and Abu Dhabi, but these would require a sign-off from the UAE’s General Civil Aviation Authority (GCAA).

Joby founder and CEO JoeBen Bevirt said at DriftX that the company has been collaborating closely with the GCAA for the past six years, working within a framework that builds on FAA standards. But it will need to complete some additional testing and a review process with the regulator.

“Today’s agreement demonstrates the incredible momentum behind the adoption of clean flight across the UAE,” said Bevirt. “We’re looking forward to delivering a fantastic experience for our future customers in Abu Dhabi, and we’re excited to be unlocking the potential for zero-emissions flight between Abu Dhabi and Dubai.”

Goldstein and Bevirt at DriftX spoke about what brought Archer and Joby to Abu Dhabi, citing the Emirate’s existing infrastructure and “unprecedented” (per Bevirt) partnership opportunities as draws. Both CEOs said Emirati officials and communities may be enticed by the value creation aspect of vertiports, claiming that their installation will increase real estate value in surrounding areas.

Both companies emphasized the necessity of partnerships. As Goldstein put it, “we won’t be able to do it alone” when it comes to building the ecosystem surrounding their aircraft.

Like this story? We think you’ll also like the Future of FLYING newsletter sent every Thursday afternoon. Sign up now.

The post Air Taxi Manufacturers Archer, Joby Set Sights on Abu Dhabi appeared first on FLYING Magazine.