The company on Thursday announced it intends to launch a city center-to-airport network in Los Angeles by 2026, building on its plans to fly in New York City and Chicago. The service is meant to replace one-to-two-hour drives by car with more direct aerial routes while remaining cost competitive with ground-based rideshare options such as Uber and Lyft.

Archer in July also struck a deal with Southwest Airlines to connect Southwest terminals across California, where it is in the process of building a network of hubs linking South San Francisco, Napa, San Jose, Oakland, and Livermore.

The manufacturer’s flagship Midnight air taxi is designed for a pilot to fly as many as four passengers on back-to-back, 20-to-50 sm, 10-to-20-minute trips, with only a few minutes of charge time in between. The company hopes to obtain type certification from the FAA in time for a 2025 commercial rollout in New York and Chicago.

After that, it will set its sights on Los Angeles, where it intends to connect key locations such as Los Angeles International Airport (KLAX), Orange County, Santa Monica, Hollywood Burbank, Long Beach, Van Nuys, and the University of Southern California with vertiports. These takeoff and landing hubs are akin to heliports but will include electric aircraft chargers for Midnight and other electric aircraft to juice up.

Archer also has a memorandum of understanding (MOU) with FBO network Signature Aviation to install electric chargers at more than 200 Signature terminals nationwide, adding to the number of potential takeoff and landing sites for Midnight.

Archer competitor Joby Aviation is also looking to fly in the Los Angeles area in partnership with Delta Air Lines and earlier this year began the process of installing eVTOL infrastructure in California. Boeing air taxi subsidiary Wisk Aero, eVTOL jet manufacturer Lilium, and eVTOL developer Overair are among firms with similar ambitions.

The companies hope to showcase their aircraft on the world stage when the 2028 Olympic and Paralympic Games in Los Angeles arrive— an ambitious target but one that is in line with the FAA’s own expectations for the industry. The city will also host men’s soccer games during the 2026 World Cup, which is being jointly held in the U.S., Canada, and Mexico.

“Establishing our LA network ahead of the global events that are coming to the region over the next three years is a milestone that will put Midnight on display for the whole world to see,” said Adam Goldstein, CEO of Archer. “LA is known for its horrendous traffic—our goal is to offer a safer, faster, and more sustainable alternative travel option.”

A handful of eVTOL manufacturers, including Germany’s Volocopter and China’s AutoFlight, are supposed to demonstrate their air taxis at the 2024 Olympic and Paralympic Games in Paris, but those flights have yet to take place and may not happen at all.

Aiding Archer, however, is a tight relationship with the FAA and the backing of California state officials such as Governor Gavin Newsom.

“Homegrown companies like Archer Aviation are pioneering the next generation of zero-emission transportation that will help California cut pollution, clean our air, and reduce traffic,” said Newsom.

Like this story? We think you’ll also like the Future of FLYING newsletter sent every Thursday afternoon. Sign up now.

The post Archer Bringing Electric Air Taxis to Los Angeles by 2026 appeared first on FLYING Magazine.

On Friday, Southwest and Archer Aviation, manufacturer of the Midnight electric vertical takeoff and landing (eVTOL) air taxi, signed a memorandum of understanding (MOU) to develop a network of routes connecting Southwest terminals at California airports.

The airline is the state’s largest air carrier and owns key hubs in Los Angeles, San Diego, Sacramento, and the San Francisco Bay Area, where Archer recently announced plans to construct eVOL infrastructure, such as takeoff and landing vertiports, at five airports.

Archer’s flagship aircraft, which takes off and lands like a helicopter but flies on fixed wings like an airplane, is designed for a pilot to fly as many as four passengers on 20 to 50 sm (17 to 43 nm) air taxi routes, cruising at up to 150 mph (130 knots).

As soon as next year, it will begin ferrying customers to and from airports at a price the manufacturer claims will be cost-competitive with ground-based rideshare services such as Uber or Lyft.

“Integrating Archer’s electric aircraft into the travel journey potentially gives us an innovative opportunity to enhance the experience of flying Southwest,” said Paul Cullen, vice president of real estate for the airline.

Cullen also left the door open for an expansion of Southwest’s air taxi service to locations in other states.

Added Dee Dee Meyers, senior adviser to California Governor Gavin Newson and director of the Governor’s Office of Business and Economic Development: “This initiative is designed to help revolutionize clean transportation with zero-direct emission and affordable options, enhancing the passenger experience, and supporting California’s climate action goals.”

The agreement with Southwest builds on Archer’s existing relationship with United Airlines, which in 2021 agreed to purchase 100 Midnight air taxis for an estimated $1 billion. Under that agreement, Archer will develop a software platform, mobile booking platform, and vertiport integration technology for a commercial service operated by United.

Delta Air Lines, the third major U.S. carrier with plans to launch an air taxi network, is working with Archer competitor Joby Aviation.

In addition, Archer in June signed a deal with Signature Aviation that would give it access to more than 200 FBOs, including those at New York Liberty International Airport (KEWR), Chicago O’Hare International Airport (KORD), and other airports the company intends to serve. The manufacturer also has an agreement with FBO network operator Atlantic Aviation to electrify Atlantic terminals in New York, Los Angeles, Miami, and San Francisco.

“With Archer’s Midnight aircraft, passengers will be able to fly above traffic to get to the airport faster,” said Nikhil Goel, chief commercial officer of Archer. “Southwest customers could someday complete door-to-door trips like Santa Monica [California] to Napa in less than three hours.”

Archer and Southwest will begin by developing a concept of operations for Midnight out of Southwest terminals, partnering with airline employees and union groups such as the Southwest Airlines Pilot Association (SWAPA).

The companies “plan to collaborate over the next few years as eVTOLs take flight,” which does not commit them to a 2025 or 2026 launch. Archer, Joby, and other eVTOL manufacturers such as Beta Technologies and Overair intend to enter commercial service during that time frame.

Adding Southwest as a partner could be key for Archer when considering the activities of its competitor overseas.

Both firms plan to fly in the United Arab Emirates, including the cities of Abu Dhabi and Dubai. In February, however, Joby signed what it describes as an exclusive six-year deal with Dubai’s Road and Transport Authority, giving it the sole right to operate an air taxi service in the emirate. Archer CEO Adam Goldstein has disputed the exclusivity of the agreement, saying it will have no impact on the company’s plans.

That dynamic has not yet played out in the U.S.—both companies plan to fly in New York, for example. But if Joby intends to replicate the strategy of gaining an edge over competitors with exclusive deals, partnerships such as that with Southwest become more important.

Notably, the companies have also butt heads on eVTOL infrastructure. Each is pushing for a different electric aircraft charging system to become the industry standard, similar to how Elon Musk fought for Tesla’s North American Charging Standard to supplant the widely accepted Combined Charging Standard (CCS) for electric ground vehicles (a fight Tesla ultimately would win).

Similarly, Joby wants its Global Electric Aviation Charging System (GEACS) to replace a modified version of the CSS supported by Archer, Beta, and others, which could throw a wrench into their FBO electrification plans.

Among eVTOL manufacturers, Archer and Joby are the closest to being able to fly in the U.S. Each has achieved a full transition flight using a prototype air taxi and expects to begin the critical for-credit phase of FAA certification in the coming months.

In addition, both are qualified to perform eVTOL maintenance and repairs and are in the process of training an initial group of pilots to fly their respective aircraft.

The goal is for those activities to be complete in time for a 2025 launch. Whether Southwest will be a part of that occasion remains to be seen.

Like this story? We think you’ll also like the Future of FLYING newsletter sent every Thursday afternoon. Sign up now.

The post Southwest Strikes Deal With Archer for Electric Air Taxi Service appeared first on FLYING Magazine.

UrbanLink Air Mobility, a newly formed operator of advanced air mobility (AAM) aircraft that in May agreed to purchase and operate 20 Lilium Jets, on Monday partnered with Ferrovial Vertiports to build a network of takeoff and landing hubs in South Florida and Southern California, including Los Angeles. The partners plan to add more locations to the network.

While not explicitly named in the agreement, Lilium in 2021 enlisted Ferrovial, the parent company of Ferrovial Vertiports, to build at least 10 vertiports covering “all major cities across Florida.” UrbanLink intends to launch initial eVTOL routes using the Lilium Jet by summer 2026, one year later than the planned U.S. debuts of eVTOL air taxi companies Archer Aviation and Joby Aviation.

“This partnership is a critical step in accelerating the deployment of our Lilium Jets and enhancing connectivity in the U.S., bringing us one step closer to making AAM a reality,” said UrbanLink chairman Ed Wegel, who founded the company in May.

Wegel is also the founder and former CEO of Global Crossing Airlines, for which he currently serves as a board member, and recently founded a scheduled carrier startup, Zoom! Airlines, that will deploy Embraer E-Jets. He said Zoom! will “work closely” with UrbanLink to provide passenger connections.

For UrbanLink and Lilium to succeed, they will need to have the proper infrastructure in place. Vertiports are to eVTOLs what airports are to commercial airliners. Without them, the aircraft lack a place to take off, land, and charge.

The Lilium Jet is no exception. It uses 36 electric ducted fans embedded in its wings for vertical propulsion, which the company says greatly reduces noise. Compared to propeller-based eVTOL designs, the aircraft sacrifices efficiency during the takeoff and hover phase in exchange for more efficient cruising on its fixed wings.

The manufacturer’s flagship model is designed for a pilot and up to six passengers, cruising at 162 knots on trips between towns and inner cities spanning 25 to 125 sm (22 to 109 nm).

UrbanLink and Ferrovial Vertiports will collaborate on vertiport site selection, facility design, and planning for future Lilium Jet operations, beginning with the manufacturer’s planned South Florida network. In February, Lilium tapped Orlando International Airport (KMCO) to be the main hub in that system and is working with the airport to install a vertiport.

Fractional aircraft ownership firm NetJets is also part of the company’s South Florida plans, having signed a memorandum of understanding (MOU) in 2022 for the purchase of up to 150 jets. Houston-based Bristow Group will provide maintenance services, and FlightSafety International has agreed to train eVTOL pilots for the company.

Outside Florida, UrbanLink and Ferrovial view Los Angeles and the broader Southern California region as the next potential market for the Lilium Jet.

Notably, Ferrovial Vertiports locations are intended to be accessible to any eVTOL design, meaning UrbanLink—or another operator—could one day use them to host multiple aircraft models.

“Our focus is on ensuring that an agnostic vertiport network is in place for operators like UrbanLink when eVTOLs gain certification,” said Kevin Cox, CEO of Ferrovial Vertiports.

On that front, Lilium hopes to achieve European Union Aviation Safety Agency (EASA) type certification as a Part 21 commercial aircraft in 2025. The aircraft has already received its certification basis, and Lilium in November became one of the first eVTOL manufacturers to receive EASA design organization approval (DOA), a required step for companies developing commercial designs.

The company is also the only eVTOL manufacturer to hold type certification bases from both EASA and the FAA. It hopes to leverage that status by activating the Bilateral Aviation Safety Agreement between the two regulators.

UrbanLink, meanwhile, claims it will be the first U.S. airline to integrate eVTOL aircraft into its fleet. eVTOL air taxi firms Archer and Joby have partnerships with United Airlines and Delta Air Lines, respectively. Archer will operate its flagship Midnight model on behalf of United through its Part 135 subsidiary, Archer Air, while Joby will operate its aircraft through Delta’s channels.

In addition, Lilium will work with FBO network Atlantic Aviation to electrify its network of more than 100 terminals. According to the manufacturer, Atlantic operates FBOs at 30 airports across South Florida, Texas, Southern California, and the Northeast Corridor, which comprise its planned U.S. launch markets. The partners will build eVTOL infrastructure at existing and future locations.

Atlantic is also collaborating with Archer, Joby, and another U.S. eVTOL manufacturer, Beta Technologies.

Like this story? We think you’ll also like the Future of FLYING newsletter sent every Thursday afternoon. Sign up now.

The post Lilium Partner UrbanLink Eyes California eVTOL Expansion appeared first on FLYING Magazine.

The approval covers commercial BVLOS flights of AATI’s fixed-wing AiRanger drone in San Joaquin Valley, California. AiRanger will conduct pipeline surveillance and inspections on behalf of AATI partner Chevron Pipe Line Company (CPL), a subsidiary of oil and gas titan Chevron, which has helped develop the aircraft since 2019.

BVLOS is considered by many to be the pinnacle of drone regulations.

Under FAA rules, commercial drones must be flown within view of a human observer, which typically limits UAS service range and increases operational costs. In lieu of a final BVLOS regulation, which is still being developed, the agency awards waivers or exemptions for such operations on a case-by-case basis.

Most major drone operators, including Zipline and Wing, possess such approvals. AATI, though, says its exemption is the first for a UAS with AiRanger’s specifications.

The drone has a maximum takeoff weight of 220 pounds and can fly for up to 12 hours, with a range of about 750 sm (652 nm) and top altitude of 12,000 feet msl. It is intended to fly in civil airspace. AATI’s FAA waiver authorizes operations over a 4,350 square mile area at up to 8,000 feet msl.

“The uncrewed AiRanger eliminates the risk to flight crews on traditional patrol aircraft while producing 35 times less CO2,” said David Yoel, founder and CEO of AATI. “It is also capable of patrolling at 30 times the rate of BVLOS [small UAS] operating under 400 [feet].”

AiRanger is 10 feet long with an 18.2-foot wingspan and 75-pound payload, including fuel. The drone runs on a gasoline engine, typically cruising at 50 to 75 knots. 

AATI partner Iridium—which provides AiRanger’s detect and avoid (DAA) and command and control (C2) capabilities via satellite connectivity—says the aircraft “is the first UAS to demonstrate compliance with industry consensus standards for the DAA system and meet FAA requirements for aircraft right of way BVLOS operations.”

According to CPL, the manufacturer conducted DAA demonstrations for the FAA and completed agency-observed testing that validated the system could stand in for human observers. A waiver for AiRanger followed shortly after, it says.

The UAS will initially be deployed for critical infrastructure patrol, threat detection, and reporting, according to AATI, first with CPL and primarily within the oil and gas sector. It can be configured for a range of applications and carry several different pieces of equipment at once, such as remote sensing, surveillance, and particulate sensors.

Like this story? We think you’ll also like the Future of FLYING newsletter sent every Thursday afternoon. Sign up now.

The post Drone Manufacturer AATI Claims First-of-Its-Kind FAA Approval appeared first on FLYING Magazine.

“This is a transformative time for Signature, and our partnership with Neste is helping us take another significant step towards net zero by providing a 100 percent supply of blended SAF at our Los Angeles location,” said Derek DeCross, chief commercial officer at Signature Aviation. “This collaboration exemplifies how we’re working together with both our guests and our partners to accelerate the adoption of environmentally friendly practices and paving the way for a more sustainable future in aviation.”

• READ MORE: Boeing Ready to Buy 7.5 Million Gallons of SAF

The blended SAF offering provided by Signature at its LAX location includes 30 percent of Neste MY SAF and 70 percent conventional jet fuel, enabling partners to achieve a 24 percent decrease in greenhouse gas (GHG) emissions from air travel. SAF is approved for use blended up to 50 percent with conventional jet fuel.

Neste’s SAF is made from sustainably sourced, 100 percent renewable waste and residue raw materials, such as used cooking oil and animal fat waste. 

Signature and Neste have been in a partnership since 2020 designed to help accelerate the industry’s adoption of SAF. Signature plans to expand the availability of Neste MY SAF to the rest of its California locations. Neste is expanding its SAF production capability to 515 million gallons of SAF annually in 2024 to meet the growing demand.

Signature said it recently passed the 30 million-gallon mark in terms of total SAF delivered throughout its network, describing it as a substantial leap toward reducing carbon emissions and helping the aviation industry reach net zero by 2050.

• READ MORE: Business Aviation Industry Groups Aim to Speed Adoption of SAF

“We are proud to continue expanding our collaboration with committed partners like Signature Aviation, who recognize the key role sustainable aviation fuel can play in reducing GHG emissions from air travel,” said Carrie Song, senior vice president of commercial renewable products at Neste. “Offering blended Neste MY Sustainable Aviation Fuel to all of its customers at LAX is a shining example of how the business aviation community can work together with fuel producers to accelerate SAF adoption and emission reductions.”

The transition to SAF at KLAX was completed on April 1. It is the second location on the West Coast to offer the more environmentally friendly fuel. The first Signature location to provide SAF was San Francisco International Airport (KSFO).

In addition, the growth in SAF availability at Signature LAX will also expand the location’s role as a key component in Signature’s book-and-claim program. Under the program, travelers and operators are able to purchase SAF in areas where it isn’t physically available.

“When an operator utilizes book and claim, they are able to claim the environmental benefit, while the physical SAF is provided for different aircraft at Signature LAX,” Signature said.

The post Signature Aviation Pumping Blended SAF at LAX Terminal appeared first on FLYING Magazine.

California-based MightyFly this week announced what the company is calling an “industry first” FAA authorization, granting it permission to test its recently unveiled 2024 Cento within a flight corridor between New Jerusalem Airport (1Q4) and Byron Airport (C83) in California.

MightyFly says the approval, obtained in March, is the first for a large, self-flying cargo eVTOL in the U.S., with “large” denoting a weight greater than 55 pounds. According to the FAA, the company’s UAS has a maximum takeoff weight of 550 pounds. MightyFly in January received an FAA special airworthiness certificate (SAC) and certificate of waiver or authorization (COA) to establish the corridor.

“This route is designed to connect the existing operating areas around the airports while ensuring the UAS does not overfly the city of Tracy or impact Stockton [Metropolitan Airport], which is Class D airspace,” the FAA told FLYING. “MightyFly needed the new authorization to operate in the area, but they could have started testing inside the operating areas that were previously approved.”

The firm’s March approval, which it obtained via Freedom of Information Act (FOIA) request, includes a COA authorizing a flight corridor up to 5,000 feet agl between New Jerusalem and Byron airports. The COA opens the ability for the company to perform what it terms “A-to-B flights” within the corridor’s general aviation airspace, allowing it to test aircraft range, among other things.

Following ground testing at its headquarters and test site, MightyFly began flying the 2024 Cento at the corridor’s origin airport on March 4. In the span of two months, the company has completed more than 30 autonomous flights, or about one every two days.

Future testing will include A-to-B flights. Eventually, it will expand to additional use cases and markets, MightyFly says.

“This is a solid vote of confidence from the FAA in our work and our ability to perform safe autonomous flights in the general aviation airspace,” said Manal Habib, CEO of MightyFly. “We now look forward to demonstrating point-to-point delivery flights with our partners in this space.”

The authorization also contains a SAC that will allow MightyFly to test Cento’s beyond visual line of sight (BVLOS) capabilities, which are considered key for enabling drone delivery at scale.

BVLOS refers to the drone operator’s ability (or lack thereof) to visually monitor the aircraft in the sky. In lieu of a final BVLOS rule, the FAA awards these permissions to select companies via waiver or exemption. But for safety reasons most companies must keep their drones within view of the operator.

However, technologies such as detect and avoid and remote identification have the potential to replace human observers as they mature. MightyFly will test Cento’s detect and avoid systems and long-range command and control (C2) datalink communications while the self-flying drone is trailed by a chase airplane.

The SAC also authorizes MightyFly to begin point-to-point autonomous deliveries and proof of concept demonstrations with customers and partners. These will include deliveries of medical and pharmaceutical supplies, spare parts and manufacturing components, and consumer goods within the flight corridor.

Future demonstrations include several planned point-to-point autonomous cargo delivery flights in Michigan under a contract with the state’s Office of Future Mobility and Electrification. The company is also scheduled to demonstrate Cento’s ability to autonomously load, unload, and balance packages for the U.S. Air Force in 2025. These flights, MightyFly says, will mark its “entry into the expedited delivery market.”

The 2024 Cento, MightyFly’s third-generation aircraft, is designed for expedited or “just-in-time” deliveries. Potential customers include manufacturers, medical teams, first responders, retailers, and logistics, automotive, and oil and gas companies.

The third-generation drone is built to carry up to 100 pounds of cargo over 600 sm (521 nm), cruising at 150 mph (130 knots). Under full autonomy, it is expected to be able to land at a fulfillment center, receive packages, fly to a destination, unload its cargo, and take off for its next delivery.

MightyFly’s Autonomous Load Mastering System (ALMS) autonomously opens and closes the cargo bay door, secures packages in (or ejects them from) the cargo hold, and senses the payload’s weight and balance to determine its center of gravity. The company is working with the Air Force and its Air Mobility Command to develop ALMS.

Another key differentiator for the 2024 Cento is its flexibility. The drone can handle a variety of cargo contents, densities, loading orders, and tie-down positions. That means customers won’t need to standardize their packaging or order loading processes to accommodate it. The aircraft can carry refrigeration boxes, for example, which are often used in the healthcare industry to transport organ donations or blood bags.

Like this story? We think you’ll also like the Future of FLYING newsletter sent every Thursday afternoon. Sign up now.

The post MightyFly Obtains ‘Industry First’ FAA Flight Corridor Approval in California appeared first on FLYING Magazine.

Joby rolled out its first production prototype from Marina in June, delivering it in September to Edwards Air Force base (KEDW) in California ahead of schedule. There, U.S. Air Force personnel are using the aircraft to conduct logistics and other missions during joint testing. Joby and AFWERX, the innovation arm of the Air Force, signed an aircraft development and flight testing contract in 2020 that has since been expanded multiple times.

Joby says it expects its second prototype, on display at Marina on Monday, to join its counterpart at Edwards later this year following final testing.

The manufacturer designed its flagship air taxi to carry a pilot and as many as four passengers on trips up to 100 sm (87 nm), cruising at 200 mph (174 knots). The company is targeting commercial launches in major U.S. cities such as New York and Los Angeles, where it will ferry customers to and from airports in partnership with Delta Air Lines, in 2025.

A groundbreaking ceremony for the Marina expansion, which Joby expects will more than double the facility’s production capacity, was attended by a who’s who of local stakeholders, including the city of Marina and the Monterey Bay Economic Partnership (MBEP), and Drone, Automation, and Robotics Technology (DART) groups. A representative of the company’s manufacturing partner, auto manufacturer Toyota, was also present.

“This facility will play a foundational role in our future success, and it is a privilege to once again be growing our footprint and our workforce in California,” said JoeBen Bevirt, founder and CEO of Joby. “I am grateful to the local community and our many supporters who have advocated on our behalf to reach this point and to Toyota for everything they continue to do to make manufacturing a success at Joby.”

Joby expects the expanded Marina facility to be open for operations by next year. The company is targeting a production rate of 25 aircraft annually as its scaled manufacturing plant in Dayton, Ohio, comes online.

The Dayton facility, selected in September, is expected to initially churn out 500 aircraft per year when full-scale operations begin in 2025. The 140-acre site has enough space for the company to one day fill it with more than 2 million square feet of manufacturing assets, which figures to expand capacity further.

However, Marina also has an important role to play for Joby. The company in its 2023 earnings report said a significant portion of the approximately $450 million in cash and short-term investments it projects for 2024 will go toward the site’s expansion. On Monday, it confirmed that a pilot training and flight simulation center as well as a maintenance hub, intended to support early operations, are among the planned facilities.

The expansion is funded in part by the California Governor’s Office of Business and Economic Development (GO-Biz), which in November awarded Joby a $9.8 million California Competes grant.

The prototype aircraft being built at Marina will further support Joby’s quest for type certification. The company’s initial prototype was responsible for its first $1 million in revenue, as reported in its 2023 earnings: early flight services provided to the Department of Defense, conducted at Marina Municipal Airport.

Since then, the manufacturer has committed to two more air taxi deliveries to MacDill Air Force Base (KMCF) in Tampa, Florida, in an expansion of its $131 million contract with AFWERX. The agreement calls for the delivery of nine aircraft, of which the company has now firmly committed to four.

Evaluations conducted under the contract figure to help Joby refine its air taxi design ahead of for-credit type certification testing with the FAA. The company in February said it is ramping up to for-credit testing following the regulator’s acceptance of the certification plans for its aircraft, components, and systems.

Following the rollout of its second air taxi prototype, Joby says another two aircraft are in the final assembly phase. Parts for “multiple subsequent aircraft” are in production at the company’s recently acquired facility in Ohio, from where they will be shipped to Marina.

Like this story? We think you’ll also like the Future of FLYING newsletter sent every Thursday afternoon. Sign up now.

The post Joby Rolls Out Second Air Taxi Prototype, Breaks Ground on Expansion appeared first on FLYING Magazine.

On Monday, Santa Barbara Municipal Airport (KSBA) was closed due to flooding from as much as 10 inches of rain. According to the airport website, the facility will remain shut down until further notice—more specifically until the water recedes and authorities can check for and repair any damage.

The airport saw 35 flights were canceled on Monday.

According to multiple media sources, Santa Barbara County has been hammered by heavy rain, leading to landslides, downed power lines, and flooding in multiple areas, including the airport that sits at an elevation of just 13.5 feet above sea level. The facility is located in the city of Goleta and bordered by a wetland area known as the Goleta Slough. Local aviation sites note the airport closes frequently due to flooding caused by heavy rains. The entire area is under a flood warning, and there have been multiple evacuations.

FAA NOTAMs have been published to warn pilots that Runways 15R/33L and 15L/33R are closed, and the safety area of Runway 07/25 has standing water.

• READ MORE: California Airports Reeling from Heavy Rain

Early in its use, the airport, opened in 1914, had a seaplane base established by the Lockheed brothers. In 1942 the government took over the airport to create Marine Corps Air Station Santa Barbara, but it reverted to civilian use in 1946. Today it covers 948 acres with three runways and is served by several major airlines in addition to general aviation operations.

The post Santa Barbara Airport Closed Due to Flooding appeared first on FLYING Magazine.

For the unfamiliar, Top Gun: Maverick is set 30 years after the original film. Maverick is still a naval aviator, highly decorated, but with an uncanny ability to get into just enough trouble to keep from getting promoted out of the cockpit. He is the test pilot for the hypersonic Darkstar scramjet. We’re never told explicitly what Darkstar’s mission is, but it is noted that the government wants to pull the funding for the project in part because it hasn’t yet reached the contract spec of Mach 10 (7672.691 mph).

Maverick suits up for a test flight. He is cautioned to obey the parameters of it and not to exceed Mach 9 (6,905.42 mph). But this is Maverick we’re talking about. He pushes the aircraft to Mach 10, destroying it in the process. Tom “Iceman” Kazansky, Maverick’s contemporary who has advanced in rank, saves his friend’s career by sending him to the Top Gun school at NAS North Island, where he is charged with training the next generation of naval fighter pilots while battling his inner demons—one of the nuggets is the son of his backseater, Nick “Goose” Bradshaw, who was killed in the first movie.

There is a lot of fancy flying in the movie, and it has generated hours of debate in FBOs and online from pilots and aviation enthusiasts who wonder if Darkstar is real and not the Queen Mother of a scale model movie prop.

(Reality check: The closest a piloted aircraft has come to Mach 10 is the SR-71 Blackbird designed by Lockheed’s Kelly Johnson during the Cold War that reached Mach 3.3 or 2,531.988 mph.)

According to Fred Bell, vice chairman of the Palm Spring Air Museum, Darkstar represents the sixth generation of aviation stealth technology. The conceptual design for it—not to be confused with a drone project of the same name—was created by Lockheed Martin Advanced Development Programs.

• READ MORE: Taking a Transcontinental Flight in the Hypersonic Darkstar, Virtually

Lockheed Martin Meets Hollywood

In 2017 Hollywood producers who wanted a hypersonic design for the movie approached Lockheed Martin asking for a conceptual design—could anything go that fast? They knew aviators and other “rivet counters” (the polite term for the people who pick apart aviation movies as though their parentage has been insulted) would be unmerciful in their criticism unless some effort was made to at least embrace the laws of physics and reality.

The Lockheed Martin designers came up with an aircraft that looks very much like a cross between two other of its models: the SR-71 Blackbird—SR stands for Strategic Reconnaissance—the now retired, super-fast design; and the Lockheed Martin F-35, also known as “the world’s most advanced fighter jet.”

In the movie, Darkstar has some dramatic and moving scenes. For example, on the morning of the test flight the camera pans the aircraft in sort of a walk-around and shows a skunk image on the tail. The skunk is a trademarked by Lockheed Martin ADP, which is also known as Skunk Works, because in the 1930s the company was located in Southern California next to a plastics plant that gave off a horrible stench. Super-secret aircraft were developed there, and the term “skunk works” remains synonymous with a place where such technology is developed.

Secrecy is still a big deal, even with movie airplanes. The Darkstar designers are identified only by their first names: Jim, Jason, Lucio, and Becky. According to information provided by Lockheed Martin, when the movie premiered, Jim is credited with the conceptual design. Jason and Lucio handled the task of turning the conceptual designs into a realistic aircraft model with a working cockpit. Becky, a mechanical engineer, worked with the movie team to build the Darkstar vehicle, including the functional cockpit, and kept the model structurally sound during the filming process.

This is no scale model, noted Bell.

“It measures 40-feet wide by 70-feet long,” Bell said. “It is a dagger shaped aircraft with a tremendous amount of detail. On the landing gear the serial number of the tires are stamped on the wheels. The cockpit has an articulating canopy that opens and inside you will see a Lockheed Martin Skunk Works control stick.”

The aircraft even has panel covers that read, “REMOVE BEFORE FLIGHT,” and on the tail there is the famous skunk standing confidently on its hind legs with his front paws folded on its chest. 

Darkstar belongs to Lockheed Martin. According to Bell, the company arranged to have the aircraft trucked to the museum and then its technicians and those of the museum reassembled it. When the aircraft was fully together, it was celebrated with a dual water cannon salute. It will be on display near other Lockheed Martin aircraft.

According to a spokesperson for Lockheed Martin, there are no plans to take Darkstar on the road for a tour as the size and complexity of moving it makes that untenable. If you want to see the aircraft up close, make the trip to Palm Springs to see the Darkstar Rising Experience. This includes a comprehensive design-to-cockpit tour, and talks from guest speakers as the museum explores the developments in stealth technology.

“We will have people talking about how the aircraft was created and how it was used in the movie, and will talk about stealth technology in general—where it came from and where it is going,” Bell said. “It’s no longer enough to be fast.”

Details, including ticket prices, can be found here.

The schedule is as follows:

February 24: The making of Darkstar

March 1: Behind the scenes: Darkstar comes to life, making movie magic

March 20: The next generation of stealth

March 27: The next generation of hypersonic aircraft

All viewings will take place from 5:30 p.m. to 7 p.m. PST.

The post Movie Star Airplane Appears in Palm Springs Aviation Museum appeared first on FLYING Magazine.

According to Cal Fire, once the transfer of ownership is completed, 4,000-gallon internal tanks capable of holding fire retardant will be installed on the aircraft. Cal Fire expects to have the aircraft on the line and in use by fall.

The aircraft will be stationed at Cal Fire bases in Chico, Fresno, Paso Robles, Ramona, and Sacramento.

About the C-130

The Lockheed Martin C-130 Hercules is a four-engine turboprop military transport. Originally designed to be a troop carrier, it entered service in 1956. One of the more versatile aircraft in the military arsenal, it has also been used for medevac, cargo transport, gunship, search and rescue, patrol, weather reconnaissance, and aerial firefighting missions.

There are more than 40 variants of the Hercules and they are operated around the world. The civilian designation is the Lockheed L-100. To date, the C-130 is still in production.

Not the First Military Fire Bomber

There is a long tradition of military aircraft being retrofitted to fight fires in the Golden State. After World War II, Boeing B-17s that were last in the production run and never saw combat were converted into fire bombers, also known as “Borate Bombers.” They were in service until replaced by newer aircraft in the 1980s.

The post California Receiving More C-130s to Fight Wildfires appeared first on FLYING Magazine.